BME280 Temp / Humidity / Pressure
I²C / SPI sensor with ±0.5 °C, ±3 %RH and ±1 hPa accuracy — plugs straight int
Sensors, actuators and accessories. Supported parts work out of the box; items marked “In progress” have no driver yet, and “Exclusive” parts cannot share pins with another page.
ExclusiveIn progress“Exclusive”: shares pins or a bus with another page, so only one can be active. “In progress”: the driver is still being written, so the box cannot read it yet.
🎁 Signed-in members get 20% off automatically
247 items · page 1 of 21
I²C / SPI sensor with ±0.5 °C, ±3 %RH and ±1 hPa accuracy — plugs straight int
0–26 V bus and ±3.2 A bidirectional current with a 12-bit ADC — built for long
2–400 cm ranging over GPIO trigger/echo — the built-in logic analyzer makes th
180° position servo — drive it from PCA9685 CH6 for pan/tilt mounts or car ste
Four-phase geared stepper with a ULN2003 driver board — dosing, knob control a
Optocoupler-isolated with 10 A contacts. Always cut the power before wiring 22
Official car expansion board: 16-channel 12-bit PWM at I²C 0x40, four motors p
Matches the on-board UART and I²C headers — 20 cm, pack of five, no soldering
Pre-formatted FAT32, ready for waveform and capture recording; industrial-grad
USB 2.0 data plus 3 A power delivery — essential for flashing firmware and ser
I²C at 0x44 with ±0.2 °C / ±2 %RH and a CRC8 on every frame. Drives page 37 st
300–1100 hPa plus temperature over I²C at 0x76 (0x77 with ADDR high) for page