πŸ“Ά

SIM800L 2G Module

The cheap 2G veteran

Page 59 of 64 MCP / API open OTA updates

Page 59 drives the SIM800L as a generic cellular module: signal strength, operator, registration state, SMS and dialling all go through the AT channel.

β˜… Power is its weak point: 3.7–4.2 V with 2 A peaks. Feeding it from the board 3V3/5V makes it reboot in a loop, and the page keeps a supply warning on screen.

Screen

On-screen interface

A recreation of this page on the 2.41-inch AMOLED display (600 Γ— 450). Actual interaction and layout follow the latest firmware.

Peripheral 4G module Β· AT
Signal-71dBm Β· good
Networkregistered Β· CHN-UNICOM
APN / IP3gnet Β· 10.42.7.19
Supply3.4–4.2 V Β· own supply
Health88
Shares 43/44 with p.19/32/34 β€” one at a time
Screen Β· Page 59
May differ from the actual interface; the screen of the real device is the final reference.
Highlights

Key capabilities

πŸ“Ά

AT channel

Uses 43/44, exclusive with pages 19/32/34.

πŸ”‹

Supply warning

Reminder about 3.7–4.2 V / 2 A.

πŸ’¬

SMS

Send and receive, Chinese via UCS2.

🩺

Health score

No SIM, no registration and brownout separated.

Specifications

Technical specs

Network2G GSM/GPRS 900/1800 MHz
UART43 (TX) / 44 (RX), exclusive with pages 19/32/34
Supply3.7–4.2 V, 2 A peak (separate supply)
Firmware pagePage 59
Use Cases

Typical scenarios

SMS trigger

One text message fires an action.

Cheap telemetry

Lowest data cost for occasional reports.

Commands

Related commands

page 59  Open the SIM800L page
at  Send a raw AT command

Read the full API & command reference β†’

⚠ Boundaries & notes
  • β˜… Needs its own 3.7–4.2 V supply with 2 A peaks; the board alone cannot feed it.
  • 2G is being retired in many regions β€” check coverage first.
  • Competes with pages 19/32/34 for the same UART.

Other feature pages