π
VL53L1X Laser Range
The longer-range ToF
Page 53 drives the VL53L1X: distance in centimetres, a zone bar and the raw millimetre value, reaching further than the VL53L0X (about 4 m in standard mode).
β It shares address 0x29 with the VL53L0X, so only one of them can be connected at a time.
Screen
On-screen interface
A recreation of this page on the 2.41-inch AMOLED display (600 Γ 450). Actual interaction and layout follow the latest firmware.
Distance168cm Β· far
0 ββ 168 ββ 400 cm
Raw1682 mm
ChipVL53L1X β (not L0X)
Range4 ~ 400 cm
Health94
Shares 0x29 with VL53L0X β one at a time
Screen Β· Page 53
May differ from the actual interface; the screen of the real device is the final reference.
Highlights
Key capabilities
π
Up to 4 m
Twice the L0X range for bins and obstacle sensing.
πͺͺ
ID check
Reads the chip ID to tell L1X from L0X.
π―
Zone readout
Very close / close / mid / far / very far.
π©Ί
Health score
Timing failures are reported explicitly.
Specifications
Technical specs
InterfaceIΒ²C 0x29 (same as L0X)
RangeAbout 4β400 cm
Supply3.3 V
Firmware pagePage 53
Use Cases
Typical scenarios
Bin level
Measure the headroom above the contents.
Obstacle sensing
Sees obstacles earlier than an L0X.
Commands
Related commands
page 53 Open the VL53L1X page vl1 Read distance once
β Boundaries & notes
- Same 0x29 address as the VL53L0X β one per bus.
- Direct sunlight, black felt and clear glass all hurt accuracy.
Other feature pages
π Overview Home12-tile quick launch plus everyday toggles β the power-on default, and where everything starts.β‘Dashboard Β· Power & ConsumptionBLE-connected current meter with live voltage/current/power curves at fixed-point 10βΆ precision.πWaveform PanelLive curves for frame rate, heap and task load β spot the bottleneck at a glance.π΅BLE DebuggerBLE scan/connect/service discovery with full GATT tree browsing and read/write.